GSM controllers
Personal tracker
Software
Black Box
SAT controllers
GPS repeater

Main page
tel: +38(044)280 4750
+38(050)355 0100
fax:+38(044)280 3506
sales@sattrans.com.ua
Partners
Pan Telecom Group

Thuraya UkraineUMC

Black Box Systems





About us Contacts News
GSM controllers

ÌÒÀ 8000 Model
(the last model of 8th series, available since December, 2006)
GSM Controller is installing at the mobile objects for automatic remote recording of the information about the object location, condition of output signals of the analogue and digital sensors connected to it, processing, saving and viewing of this information using the GSM services.
The device can be used on such mobile objects as:
• Trucks and cars
• Busses
• Trolleybuses
• Boats, yachts, etc.

FUNCTIONS
• Geographical position determination with the standard deviation of location about 2-15 m
• The altitude above sea-level determination
• The object speed determination using GPS coordinates
• Mileage determination
• ADC conditions determination: 4 channels, 8 classes
• Vehicle’s supply voltage determination: up to 30 V
• Reserve battery tension determination
• Controller temperature determination
• State of dry contacts of the connected sensors determination: 10 channels
• Presence of the GPS signal
• The GSM signal level determination: 4 levels
• Actuator controlling:
- 15 outputs of the «opened collector» type, max. commutative tension of output up to 40V (200mA)
- 1 output: 3A - for the siren connection
- 1 output: 50mÀ – for connection of external light indicator of setting/removal of protection.

DEVICE ABILITIES
The device can be used on the vehicles that have the side-board feed sources with the tension from 8 to 24 V.
A controller has a built-in storage battery with the tension of 3.6V 1800 mÀ

The front panel of GSM controller
The front panel of GSM controller

The front panel of GSM controller

1. Socket for the photo camera connection (optional);
2. SIM-card holder;
3. Socket for the GSM antenna connection;
4. Socket for the GPS antenna connection;
5. USB socket;
6. Antenna for the security trinket output (optional);
7. Additional socket.

The back panel of GSM controller
The back panel of GSM controller

The back panel of GSM controller
1. Socket for sensors connection;
2. First LED indicator of the internal diagnostic system;
3. Second LED indicator of the internal diagnostic system;
4. LED indicator of the GPS receiver;
5. Socket for the voice-connection devices connection;
6. LED indicator of the GSM modem;
7. Socket for the executive devices and feed connection.

Send us the inquiry
On top
 
Copyright © 2007
Sattrans Navigator
FAQ